F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Command Reference-6PW100

124
You cannot remove an SSL server policy using the undo ssl server-policy command if the policy has been
referenced by the HTTPS service.
On the device, all the SSL server policies referenced by the HTTPS service must be the same.
If an online portal user exists on the device, you cannot remove or change the configured protocol type,
or modify the SSL server policies referenced.
To change the SSL server policy referenced by HTTPS service, you must cancel the HTTPS configuration
using the undo portal local-server https command, and then specify the desired SSL server policy.
The following matrix shows the portal local-server command and firewalls and UTM devices
compatibility:
Hardware Command com
p
atible
F1000-A-EI/F1000-S-EI Yes
F1000-E No
F5000 No
Firewall module No
U200-A Yes
U200-S Yes
Examples
# Configure the local portal server to support HTTP.
<Sysname> system-view
[Sysname] portal local-server http
# Configure the local portal server to support HTTPS and reference SSL server policy policy1, which has
been configured already.
<Sysname> system-view
[Sysname] portal local-server https server-policy policy1
# Change the referenced SSL server policy to policy2.
[Sysname] undo portal local-server https
[Sysname] portal local-server https server-policy policy2
Related commands
• display portal local-server
• ssl server-policy
portal max-user
Use portal max-user to set the maximum number of online portal users allowed in the system.
Use undo portal max-user to restore the default.
Syntax
portal max-user max-number
undo portal max-user