F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Command Reference-6PW100

125
Views
System view
Default command level
2: System level
Parameters
max-number: Maximum number of online portal users allowed in the system.
The following matrix shows the value range for the max-number on different firewalls and UTM devices:
Hardware Value ran
g
e
F1000-A-EI/F1000-S-EI 512
F1000-E 512
F5000 Not supported
Firewall module 512
U200-A 256
U200-S 64
Usage guidelines
If the maximum number of portal users specified in the command is less than that of the current online
portal users, the command can be executed successfully and does not impact the online portal users, but
the system does not allow new portal users to log in until the number drops down below the limit.
Examples
# Set the maximum number of portal users allowed in the system to 100.
<Sysname> system-view
[Sysname] portal max-user 100
portal nas-id-profile
Use portal nas-id-profile to specify a NAS ID profile for the interface.
Use undo portal nas-id-profile to cancel the configuration.
Syntax
portal nas-id-profile profile-name
undo portal nas-id-profile
Default
An interface is not specified with any NAS ID profile.
Views
Interface view
Default command level
2: System level