F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Command Reference-6PW100

130
The configured portal server and its parameters can be removed or modified only when the portal server
is not referenced by an interface. To remove or modify the settings of a portal server that has been
referenced by an interface, you must first remove the portal configuration on the interface by using the
undo portal command.
For local portal server configuration, the keywords key, port, and url are usually not required and, if
configured, do not take effect.
For secrecy, all keys, including keys configured in plain text, are saved in cipher text.
Examples
# Configure portal server pts, setting the IP address to 192.168.0.111, the plaintext key to portal, and the
redirection URL to h t t p : / / 19 2 .16 8 . 0 .111 / p o r t a l .
<Sysname> system-view
[Sysname] portal server pts ip 192.168.0.111 key simple portal url
http://192.168.0.111/portal
Related commands
display portal server
portal server banner
Use portal server banner to configure the welcome banner of the default webpage provided by the local
portal server.
Use undo portal server banner to restore the default.
Syntax
portal server banner banner-string
undo portal server banner
Default
No webpage welcome banner is configured.
Views
System view
Default command level
2: System level
Parameters
banner-string: Welcome banner for the webpage, a case-sensitive string of 1 to 50 characters. It cannot
contain the less-than sign (<) or the and sign (&). If multiple continuous spaces exist in the string, the
browser recognizes them as one.
Usage guidelines
The configured welcome banner is applied only to the default authentication pages, rather than the
customized authentication pages.
The following matrix shows the portal server banner command and firewalls and UTM devices
compatibility:
Hardware Command com
p
atible
F1000-A-EI/F1000-S-EI Yes