F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Command Reference-6PW100

131
Hardware Command com
p
atible
F1000-E No
F5000 No
Firewall module No
U200-A Yes
U200-S Yes
Examples
# Configure the welcome banner of the default webpage provided by the local portal server as Welcome
to Portal Authentication.
<Sysname> system-view
[Sysname] portal server banner Welcome to Portal Authentication
portal server method
Use portal server method to enable Layer 3 portal authentication on an interface, and specify the portal
server and the authentication mode to be used.
Use undo portal to disable the specified portal server or all portal servers on an interface.
Syntax
portal server server-name method { direct | layer3 | redhcp }
undo portal
Default
Layer 3 portal authentication is disabled on an interface.
Views
Interface view
Default command level
2: System level
Parameters
server-name: Name of a portal server, a case-sensitive string of 1 to 32 characters.
method: Specifies the authentication mode to be used.
direct: Direct authentication.
layer3: Cross-subnet authentication.
redhcp: Re-DHCP authentication.
Usage guidelines
The specified portal server must exist.
If you do not specify a portal server in the undo portal command, the command removes all Layer 3
portal authentication configuration on the interface.