F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Command Reference-6PW100

6
cannot be all. For this ACL, the system automatically picks the smallest number from all available
numbers in the same ACL category as the source ACL.
Usage guidelines
You can assign a name to an ACL only when you create it. After an ACL is created with a name, you
cannot rename it or remove its name.
Examples
# Create IPv6 basic ACL 2002 by copying IPv6 basic ACL 2001.
<Sysname> system-view
[Sysname] acl ipv6 copy 2001 to 2002
acl ipv6 name
Use acl ipv6 name to enter the view of an IPv6 basic or IPv6 advanced ACL that has a name.
Syntax
acl ipv6 name acl6-name
Views
System view
Default command level
2: System level
Parameters
acl6-name: Specifies an IPv6 basic or IPv6 advanced ACL name, a case-insensitive string of 1 to 63
characters. It must start with an English letter. The ACL must already exist.
Examples
# Enter the view of IPv6 basic ACL flow.
<Sysname> system-view
[Sysname] acl ipv6 name flow
[Sysname-acl6-basic-2001-flow]
Related commands
acl ipv6
acl name
Use acl name to enter the view of an IPv4 basic, IPv4 advanced, or Ethernet frame header ACL that has
a name.
Syntax
acl name acl-name
Views
System view
Default command level
2: System level