F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Command Reference-6PW100

149
authentication portal
Use authentication portal to configure the authentication method for portal users.
Use undo authentication portal to restore the default.
Syntax
authentication portal { local | none | radius-scheme radius-scheme-name [ local ] }
undo authentication portal
Default
The default authentication method for the ISP domain is used for portal users.
Views
ISP domain view
Default command level
2: System level
Parameters
local: Performs local authentication.
none: Does not perform any authentication.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive string of
1 to 32 characters.
Usage guidelines
The specified RADIUS scheme must have been configured.
The following matrix shows the authentication portal command and firewalls and UTM devices
compatibility:
Hardware Command com
p
atible
F1000-A-EI/F1000-S-EI Yes
F1000-E Yes
F5000 No
Firewall module Yes
U200-A Yes
U200-S Yes
Examples
# Configure ISP domain test to use local authentication for portal users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication portal local
# Configure ISP domain test to use RADIUS scheme rd for authentication of portal users and use local
authentication as the backup.
<Sysname> system-view
[Sysname] domain test