F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Command Reference-6PW100

152
Related commands
• authentication default
• radius scheme
authentication super
Use authentication super to configure the authentication method for user privilege level switching.
Use undo authentication super to restore the default.
Syntax
authentication super { hwtacacs-scheme hwtacacs-scheme-name | radius-scheme
radius-scheme-name }
undo authentication super
Default
The default authentication method for the ISP domain is used for user privilege level switching
authentication.
Views
ISP domain view
Default command level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a
case-insensitive string of 1 to 32 characters.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive string of
1 to 32 characters.
Usage guidelines
The specified RADIUS or HWTACACS authentication scheme must have been configured.
Examples
# Configure ISP domain test to use HWTACACS scheme tac for user privilege level switching
authentication.
<Sysname> system-view
[Sysname] super authentication-mode scheme
[Sysname] domain test
[Sysname-domain-test] authentication super hwtacacs-scheme tac
Related commands
• hwtacacs scheme
• radius scheme
• super authentication-mode (Getting Started Command Reference)
authorization command
Use authorization command to configure the command line authorization method.