F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Command Reference-6PW100

162
Default command level
1: Monitor level
Parameters
access-type portal: Specifies portal authentication as the access type.
The following matrix shows the access-type portal keyword and firewalls and UTM devices compatibility:
Hardware Ke
y
word com
p
atible
F1000-A-EI/F1000-S-EI Yes
F1000-E Yes
F5000 No
Firewall module Yes
U200-A Yes
U200-S Yes
domain isp-name: Specifies the user connections of an ISP domain. The isp-name argument represents
the name of an existing ISP domain and is a case-insensitive string of 1 to 24 characters.
interface interface-type interface-number: Specifies the user connections on an interface. Only Layer 2
Ethernet interfaces are supported.
ip ip-address: Specifies the user connections of an IP address.
mac mac-address: Specifies the user connections of a MAC address, with mac-address in the format
H-H-H.
ucibindex ucib-index: Specifies the user connection that uses the connection index. The value ranges
from 0 to 4294967295.
user-name user-name: Specifies the user connections that use the username. The user-name argument is
a case-sensitive string of 1 to 80 characters. For a username entered without a domain name, the system
assumes that the user is in the default domain name or the mandatory authentication domain.
vlan vlan-id: Specifies the user connections of a VLAN, where vlan-id ranges from 1 to 4094.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
This command does not display information about FTP user connections.
With no parameter specified, this command displays brief information about all AAA user connections.
If you specify the ucibindex ucib-index option, this command displays detailed information. Otherwise,
this command displays brief information.
If an interface is configured with a mandatory authentication domain, the device uses the mandatory
authentication domain to perform authentication, authorization, and accounting for users who access the