F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Command Reference-6PW100

168
Default
No ISP domain is specified for users with unknown domain names.
Views
System view
Default command level
3: Manage level
Parameters
isp-name: Specifies an ISP domain name, a case-insensitive string of 1 to 24 characters that cannot
contain the slash (/), backslash (\), colon (:), asterisk (*), question mark (?), left angle bracket (<), right
angle bracket (>), quotation marks ("), or at sign (@).
Usage guidelines
The device chooses an authentication domain for each user in the following order:
• The authentication domain specified for the access module
• The ISP domain in the username
• The default ISP domain of the device
• The ISP domain specified for users with unknown domain names
If all the domains are unavailable, user authentication fails.
Support for the authentication domain configuration depends on the access module. You can specify an
authentication domain for portal authentication.
Examples
# Specify the ISP domain test for users with unknown domain names.
<Sysname> system-view
[Sysname] domain if-unknown test
Related commands
domain default enable
idle-cut enable
Use idle-cut enable to enable the idle cut function and set the relevant parameters.
Use undo idle-cut enable to restore the default.
Syntax
idle-cut enable minute [ flow ]
undo idle-cut enable
Default
The function is disabled.
Views
ISP domain view
Default command level
2: System level