F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Command Reference-6PW100

172
Default
The user online time uploaded to the server excludes the idle cut time.
Views
ISP domain view
Default command level
2: System level
Usage guidelines
The device uploads to the server the online user time when a user is logged off. However, the online user
time of an abnormally logged-off user can contain an idle timeout interval or a detection interval when
the idle cut function or online portal user detection is enabled. You can configure the device to include
or exclude the idle cut time before the device uploads the online user time to the server according to your
accounting policy.
Examples
# Configure the device to include the idle cut time in the user online time uploaded to the server for ISP
domain test.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] session-time include-idle-time
Related commands
idle-cut enable
state (ISP domain view)
Use state to set the status of an ISP domain.
Use undo state to restore the default.
Syntax
state { active | block }
undo state
Default
An ISP domain is in active state.
Views
ISP domain view
Default command level
2: System level
Parameters
active: Places the ISP domain in active state to allow the users in the ISP domain to request network
services.
block: Places the ISP domain in blocked state to prevent users in the ISP domain from requesting network
services.