F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Command Reference-6PW100

185
terminal: Authorizes the user to use the terminal service, allowing the user to log in from the console or
AUX port. Support for AUX logins depends on the device model. For more information, see Getting
Started Guide.
portal: Authorizes the user to use the portal service.
The following matrix shows the portal keyword and firewalls and UTM devices compatibility:
Hardware Ke
y
word com
p
atible
F1000-A-EI/F1000-S-EI Yes
F1000-E Yes
F5000 No
Firewall module Yes
U200-A Yes
U200-S Yes
ppp: Authorizes the user to use the PPP service.
web: Authorizes the user to use the Web service.
Usage guidelines
You assign multiple service types to a user.
Examples
# Authorize user user1 to use the Telnet service.
<Sysname> system-view
[Sysname] local-user user1
[Sysname-luser-user1] service-type telnet
state (local user view)
Use state to set the status of a local user.
Use undo state to restore the default.
Syntax
state { active | block }
undo state
Default
A local user is in active state.
Views
Local user view
Default command level
2: System level
Parameters
active: Places the local user in active state to allow the local user to request network services.
block: Places the local user in blocked state to prevent the local user from requesting network services.