F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Command Reference-6PW100

195
Field Descri
p
tion
RADIUS received messages statistic Statistics for received RADIUS messages.
Normal auth request Counts of normal authentication requests.
Account request Counts of accounting requests.
Account off request Counts of stop-accounting requests.
PKT auth timeout Counts of authentication timeout messages.
PKT acct_timeout Counts of accounting timeout messages.
Realtime Account timer Counts of real-time accounting requests.
PKT response Counts of responses from servers.
Session ctrl pkt Counts of session control messages.
Normal author request Counts of normal authorization requests.
Set policy result Counts of responses to the Set policy packets.
Accounting on request Counts of accounting-on requests.
Accounting on response Counts of accounting-on responses.
Dynamic Author Ext request Counts of dynamic authorization extension requests.
RADIUS sent messages statistic Statistics for sent RADIUS messages.
Auth accept Number of accepted authentication packets.
Auth reject Number of rejected authentication packets.
EAP auth replying Number of replying packets of EAP authentication.
Account success Number of accounting succeeded packets.
Account failure Number of accounting failed packets.
Server ctrl req Number of server control requests.
RecError_MSG_sum Number of received packets in error.
SndMSG_Fail_sum Number of packets that failed to be sent out.
Timer_Err Number of packets for indicating timer startup failures.
Alloc_Mem_Err Number of packets for indicating memory allocation failures.
State Mismatch Number of packets for indicating mismatching status.
Other_Error Number of packets for indicating other types of errors.
No-response-acct-stop packet
Number of times that no response was received for stop-accounting
packets.
Discarded No-response-acct-stop
packet for buffer overflow
Number of stop-accounting packets that were buffered but then
discarded due to full memory.
The following matrix shows the maximum value of the state statistic and DEAD fields in the command
output on different firewalls and UTM devices:
Hardware Maximum value
F1000-A-EI/F1000-S-EI 1024
F1000-E 8192