F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Command Reference-6PW100

197
stop-accounting attempt. The maximum number of the stop-accounting attempts is defined by the retry
stop-accounting command. If all attempts fail, the device discards the request.
Examples
# Display information about the stop-accounting requests buffered for user abc.
<Sysname> display stop-accounting-buffer user-name abc
RDIdx Session-ID user name Happened time
1 1000326232325010 abc 23:27:16-08/31/2006
1 1000326232326010 abc 23:33:01-08/31/2006
Total 2 record(s) Matched
Related commands
• reset stop-accounting-buffer
• stop-accounting-buffer enable
• user-name-format
• retry
• retry stop-accounting
key (RADIUS scheme view)
Use key to set the shared key for secure RADIUS authentication/authorization or accounting
communication.
Use undo key to remove the configuration.
Syntax
key { accounting | authentication } [ cipher | simple ] key
undo key { accounting | authentication }
Default
No shared key is configured.
Views
RADIUS scheme view
Default command level
2: System level
Parameters
accounting: Sets the shared key for secure RADIUS accounting communication.
authentication: Sets the shared key for secure RADIUS authentication/authorization communication.
cipher: Sets a cipher text shared key.
simple: Sets a plain text shared key. This keyword is not available for FIPS mode.
key: Specifies the key string. This argument is a case-sensitive string of 1 to 64 characters. In FIPS mode,
the shared key must contain at least 8 characters comprising uppercase letters, lowercase letters, digits,
and special characters.
Usage guidelines
For secrecy, all shared keys, including keys configured in plain text, are saved in cipher text.