F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Command Reference-6PW100

211
Use undo secondary accounting to remove the configuration.
Syntax
secondary accounting { ipv4-address | ipv6 ipv6-address } [ port-number | key [ cipher | simple ] key
| vpn-instance vpn-instance-name ] *
undo secondary accounting [ ipv4-address | ipv6 ipv6-address ]
Default
No secondary RADIUS accounting server is specified.
Views
RADIUS scheme view
Default command level
2: System level
Parameters
ipv4-address: Specifies the IPv4 address of the secondary RADIUS accounting server.
ipv6 ipv6-address: Specifies the IPv6 address of the secondary RADIUS accounting server, which must
be a valid global unicast address.
The following matrix shows the ipv6 ipv6-address option and firewalls and UTM devices compatibility:
Hardware O
p
tion com
p
atible
F1000-A-EI/F1000-S-EI Yes
F1000-E Yes
F5000 Yes
Firewall module Yes
U200-A Yes
U200-S No
port-number: Specifies the service port number of the secondary RADIUS accounting server, a UDP port
number ranging from 1 to 65535. The default setting is 1813.
key [ cipher | simple ] key: Specifies the shared key for secure communication with the secondary
RADIUS accounting server. In FIPS mode, you cannot set a plaintext key, and the key must contain at least
8 characters comprising uppercase and lowercase letters, digits, and special characters. In FIPS mode,
a key is encrypted and decrypted by using the 3DES algorithm.
• cipher key: Specifies a ciphertext shared key, a case-sensitive ciphertext string of 1 to 117
characters.
• simple key: Specifies a plaintext shared key, a case-sensitive string of 1 to 64 characters.
• If neither cipher nor simple is specified, you set a plaintext shared key string.
vpn-instance vpn-instance-name: Specifies the VPN to which the secondary RADIUS accounting server
belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. If the server is
on the public network, do not specify this option.
Usage guidelines
Make sure the port number and shared key settings of the secondary RADIUS accounting server are the
same as those configured on the server.