F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Command Reference-6PW100

228
Default command level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies buffered stop-accounting requests that are destined
for the accounting server defined in an HWTACACS scheme. The HWTACACS scheme name is a
case-insensitive string of 1 to 32 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about stop-accounting requests buffered for HWTACACS scheme hwt1.
<Sysname> display stop-accounting-buffer hwtacacs-scheme hwt1
Total 0 record(s) Matched
Related commands
• reset stop-accounting-buffer
• stop-accounting-buffer enable
• retry stop-accounting
hwtacacs nas-ip
Use hwtacacs nas-ip to specify a source IP address for outgoing HWTACACS packets.
Use undo hwtacacs nas-ip to remove the configuration.
Syntax
hwtacacs nas-ip ip-address [ vpn-instance vpn-instance-name ]
undo hwtacacs nas-ip ip-address [ vpn-instance vpn-instance-name ]
Default
The source IP address of a packet sent to the server is the IP address of the outbound interface.
Views
System view
Default command level
2: System level
Parameters
ip-address: IP address in dotted decimal notation. It must be an address of the device and cannot be
0.0.0.0, 255.255.255.255, a class D address, or a class E address.
vpn-instance vpn-instance-name: Specifies the VPN to which the source IP address belongs. The
vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. With a VPN specified, the