F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Command Reference-6PW100

232
Examples
# Set the source address for outgoing HWTACACS packets to 10.1.1.1.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] nas-ip 10.1.1.1
Related commands
hwtacacs nas-ip
primary accounting (HWTACACS scheme view)
Use primary accounting to specify the primary HWTACACS accounting server.
Use undo primary accounting to remove the configuration.
Syntax
primary accounting ip-address [ port-number | vpn-instance vpn-instance-name ] *
undo primary accounting
Default
No primary HWTACACS accounting server is specified.
Views
HWTACACS scheme view
Default command level
2: System level
Parameters
ip-address: IP address of the primary HWTACACS accounting server in dotted decimal notation. The
default is 0.0.0.0.
port-number: Service port number of the primary HWTACACS accounting server. It ranges from 1 to
65535 and defaults to 49.
vpn-instance vpn-instance-name: Specifies the VPN to which the primary HWTACACS accounting
server belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. If the
server is on the public network, do not specify this option.
Usage guidelines
The IP addresses of the primary and secondary accounting servers must be different. Otherwise, the
configuration fails.
If the specified server resides on a VPN, specify the VPN by using the vpn-instance vpn-instance-name
option.
If you execute the command multiple times, the most recent configuration takes effect.
You can remove an accounting server only when it is not used by any active TCP connection to send
accounting packets. Removing an accounting server only affects accounting processes that occur after
the remove operation.
The VPN specified by this command takes precedence over the VPN specified for the HWTACACS
scheme.