F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Command Reference-6PW100

235
You can remove an authorization server only when it is not used by any active TCP connection to send
authorization packets. Removing an authorization server only affects authorization processes that occur
after the remove operation.
The VPN specified by this command takes precedence over the VPN specified for the HWTACACS
scheme.
Examples
# Configure the IP address and port number of the primary authorization server for HWTACACS scheme
hwt1 a s 10 .16 3 .15 5 .13 a n d 4 9.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] primary authorization 10.163.155.13 49
Related commands
• display hwtacacs
• vpn-instance (HWTACACS scheme view)
reset hwtacacs statistics
Use reset hwtacacs statistics to clear HWTACACS statistics.
Syntax
reset hwtacacs statistics { accounting | all | authentication | authorization }
Views
User view
Default command level
1: Monitor level
Parameters
accounting: Specifies the HWTACACS accounting statistics.
all: Specifies all HWTACACS statistics.
authentication: Specifies the HWTACACS authentication statistics.
authorization: Specifies the HWTACACS authorization statistics.
Examples
# Clear all HWTACACS statistics.
<Sysname> reset hwtacacs statistics all
Related commands
display hwtacacs
reset stop-accounting-buffer (for HWTACACS)
Use reset stop-accounting-buffer to clear the buffered stop-accounting requests for which no responses
have been received.
Syntax
reset stop-accounting-buffer hwtacacs-scheme hwtacacs-scheme-name