F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Command Reference-6PW100

236
Views
User view
Default command level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies buffered stop-accounting requests that are destined
for the accounting server defined in an HWTACACS scheme. The HWTACACS scheme name is a
case-insensitive string of 1 to 32 characters.
Examples
# Clear the stop-accounting requests buffered for HWTACACS scheme hwt1.
<Sysname> reset stop-accounting-buffer hwtacacs-scheme hwt1
Related commands
• stop-accounting-buffer enable
• display stop-accounting-buffer
retry stop-accounting (HWTACACS scheme view)
Use retry stop-accounting to set the maximum number of stop-accounting request transmission attempts.
Use undo retry stop-accounting to restore the default.
Syntax
retry stop-accounting retry-times
undo retry stop-accounting
Default
The maximum number of stop-accounting request transmission attempts is 100.
Views
HWTACACS scheme view
Default command level
2: System level
Parameters
retry-times: Maximum number of stop-accounting request transmission attempts, ranging from 1 to 300.
Examples
# Set the maximum number of stop-accounting request transmission attempts to 50 for HWTACACS
scheme hwt1.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] retry stop-accounting 50
Related commands
• reset stop-accounting-buffer
• display stop-accounting-buffer