F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Command Reference-6PW100

237
secondary accounting (HWTACACS scheme view)
Use secondary accounting to specify a secondary HWTACACS accounting server.
Use undo secondary accounting to remove the configuration.
Syntax
secondary accounting ip-address [ port-number | vpn-instance vpn-instance-name ] *
undo secondary accounting
Default
No secondary HWTACACS accounting server is specified.
Views
HWTACACS scheme view
Default command level
2: System level
Parameters
ip-address: IP address of the secondary HWTACACS accounting server in dotted decimal notation. The
default is 0.0.0.0.
port-number: Service port number of the secondary HWTACACS accounting server. It ranges from 1 to
65535 and defaults to 49.
vpn-instance vpn-instance-name: Specifies the VPN to which the secondary HWTACACS accounting
server belongs to. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. If the
server is on the public network, do not specify this option.
Usage guidelines
The IP addresses of the primary and secondary accounting servers must be different. Otherwise, the
configuration fails.
If you execute the command multiple times, the most recent configuration takes effect.
If the specified server resides on a VPN, specify the VPN by using the vpn-instance vpn-instance-name
option.
You can remove an accounting server only when it is not used by any active TCP connection to send
accounting packets. Removing an accounting server only affects accounting processes that occur after
the remove operation.
The VPN specified by this command takes precedence over the VPN specified for the HWTACACS
scheme.
Examples
# Specify the IP address and port number of the secondary accounting server for HWTACACS scheme
hwt1 a s 10 .16 3 .15 5 .12 w i t h TC P p o r t n u m b e r 4 9.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] secondary accounting 10.163.155.12 49
Related commands
• display hwtacacs