F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Command Reference-6PW100

251
Default
A user is notified of pending password expiration during 7 days before the user's password expires.
Views
System view
Default command level
2: System level
Parameters
alert-time: Number of days before a user's password expires during which the user is notified of the
pending password expiration. The value range is 1 to 30.
Examples
# Configure the device to notify a user about pending password expiration 10 days before the user's
password expires.
<Sysname> system-view
[Sysname] password-control alert-before-expire 10
password-control authentication-timeout
Use password-control authentication-timeout to set the user authentication timeout time.
Use undo password-control authentication-timeout to restore the default.
Syntax
password-control authentication-timeout authentication-timeout
undo password-control authentication-timeout
Default
The user authentication timeout time is 60 seconds.
Views
System view
Default command level
2: System level
Parameters
authentication-timeout: User authentication timeout time in seconds, in the range of 30 to 120.
Examples
# Set the user authentication timeout time to 40 seconds.
<Sysname> system-view
[Sysname] password-control authentication-timeout 40
password-control complexity
Use password-control complexity to configure the password complexity checking policy. Unqualified
passwords will be refused.
Use undo password-control complexity check to remove a password complexity checking item.