F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Command Reference-6PW100

258
[Sysname] display password-control blacklist
Username: test
IP: 192.168.44.1 Login failed times: 4 Lock flag: lock
Total 1 blacklist item(s) matched. 1 listed.
The user can no longer log in.
# Set the maximum number of login attempts to 2 and prohibit a user from logging in within 3 minutes
if the user fails to log in after two attempts.
<Sysname> system-view
[Sysname] password-control login-attempt 2 exceed lock-time 3
Later, if a user tries to log in but fails two times, you can find it in the password control blacklist, with its
status changed from unlock to lock:
[Sysname] display password-control blacklist
Username: test
IP: 192.168.44.1 Login failed times: 2 Lock flag: lock
Total 1 blacklist item(s) matched. 1 listed.
After 3 minutes, the user is removed from the password control blacklist and can log in again.
Related commands
• display password-control
• display password-control blacklist
• reset password-control blacklist
password-control password update interval
Use password-control password update interval to set the minimum password update interval, that is,
the minimum interval at which users can change their passwords.
Use undo password-control password update interval to restore the default.
Syntax
password-control password update interval interval
undo password-control password update interval
Default
The minimum password update interval is 24 hours.
Views
System view
Default command level
2: System level
Parameters
interval: Minimum password update interval, in the range of 0 to 168, in hours. 0 means no requirements
for password update interval.