F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Command Reference-6PW100

265
fips self-test
Syntax
fips self-test
View
System view
Default Level
3: Manage level
Parameters
None
Description
Use the fips self-test command to trigger a self-test on the password algorithms.
To verify whether the password algorithm modules operate normally, use this command to trigger a
self-test on the password algorithms. The triggered self-test is the same as the automatic self-test when the
device starts up.
If the self-test fails, the device automatically reboots.
This command is available only when the device starts up with the configuration file where the fips mode
enable command is configured.
Example
# Trigger a self-test on the password algorithms.
<Sysname> system-view
[Sysname] fips self-test
Self-tests are running. Please wait...
Self-tests succeeded.