F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Command Reference-6PW100

34
Use undo share enable to restore the default.
Syntax
share enable
undo share enable
Default
The share attribute of a security zone is disabled.
Views
Security zone view
Default command level
2: System level
Usage guidelines
A security zone with its share attribute enabled can be used by other VDs' interzone instances as the
destination security zone. A security zone with its share attribute disabled can only be used by an
interzone instance of its native VD.
Examples
# Enable the share attribute of security zone zonetest (with the ID 7).
<Sysname> system-view
[Sysname] zone name zonetest id 7
[Sysname-zone-zonetest] share enable
Related commands
interzone
zone
Use zone to create a security zone and enter security zone view.
Use undo zone to delete a security zone.
Syntax
zone name zone-name [ id zone-id ]
undo zone name zone-name [ id zone-id ]
Default
A non-default VD has no security zones, and the default VD has five security zones: Management (ID =
0), Local (ID = 1), Trust (ID = 2), DMZ (ID = 3), and Untrust (ID = 4).
Views
System view, VD system view
Default command level
2: System level
Parameters
zone-name: Specifies the security zone name, a case-insensitive string of 1 to 20 characters that contains
no question mark (?), less-than sign (<), greater-than sign (>), backward slash (\), quotation mark ("),
percentage sign (%), apostrophe ('), ampersand (&), or number sign (#).