F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Command Reference-6PW100

72
Parameters
None
Usage guidelines
You can enable interzone policy acceleration only for an interzone instance which has interzone policy
rules.
The following matrix shows the rule accelerate command and firewalls and UTM devices compatibility:
Hardware Command com
p
atible
F1000-A-EI/F1000-S-EI Yes
F1000-E Yes
F5000 Yes
Firewall module Yes
U200-A No
U200-S No
Examples
# Create an interzone policy rule for the interzone instance with source zone office and destination zone
library, and enable interzone policy acceleration.
<Sysname> system-view
[Sysname] interzone source office destination library
[Sysname-interzone-office-library] rule permit
[Sysname-interzone-office-library-rule-0] quit
[Sysname-interzone-office-library] rule accelerate
Related commands
rule
rule acl
Use rule acl [ ipv6 ] to create an interzone policy group by referencing an IPv4 or IPv6 advanced ACL.
Use undo rule acl [ ipv6 ] to remove an ACL from the interzone policy.
Syntax
rule acl [ ipv6 ] acl-number
undo rule acl [ ipv6 ] acl-number
Default
No interzone policy group exists.
Views
Interzone instance view
Default command level
2: System level