F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Command Reference-6PW100

87
Table 24 Command output
Field Descri
p
tion
Initiator: Initiator's session information.
Responder: Responder's session information.
Pro Transport layer protocol, TCP, UDP, ICMP, or Raw IP.
VPN-Instance/VLAN ID/VLL ID
VPN that the session belongs to and the VLAN and
INLINE that the session belongs to during Layer 2
forwarding.
App
Application layer protocol, FTP, DNS, MSN or QQ.
Unknown indicates protocol type of a non-well-known
port.
State
Session status:
• Accelerate.
• SYN.
• TCP-EST.
• FIN.
• UDP-OPEN.
• UDP-READY.
• ICMP-OPEN.
• ICMP-CLOSED.
• RAWIP-OPEN.
• RAWIP-READY.
Start Time Session establishment time.
TTL Remaining lifetime of the session, in seconds.
VD-name Name of virtual device.
Zone(in) Security zone (in).
Zone(out) Security zone (out).
Received packet(s)(Init)
Counts of packets and bytes from the initiator to the
responder.
Received packet(s)(Reply)
Counts of packets and bytes from the responder to the
initiator.
Total find Total number of found sessions.
reset session
Use reset session to clear session table entries.
Syntax
reset session [ vd vd-name ] [ source-ip source-ip ] [ destination-ip destination-ip ] [ protocol-type { icmp
| raw-ip | tcp | udp } ] [ source-port source-port ] [ destination-port destination-port ] [ vpn-instance
vpn-instance-name ]