F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Configuration Guide-6PW100

121
176BDisplaying session statistics by the IP address or the security
zone
You can display session statistics by the source IP address or destination IP address, or the source security
zone or destination security zone. To do so, you must enable the proper session statistics first.
337BEnabling session statistics
1. Select Firewall > Session Table > Statistics from the navigation tree.
2. Click the Statistics Configuration tab.
Figure 105 Session statistics configuration page
3. Enable the proper session statistics as described in 640HTable 41.
4. Click Apply.
Table 41 Configuration items
Item Descri
p
tion
Zone Select a security zone.
Enable source zone statistics
Enable collection of statistics on sessions with the source
security zone being the specified security zone.
Enable destination zone statistics
Enable collection of statistics on sessions with the destination
security zone being the specified security zone.
Enable statistics per source IP address Enable session statistics collection per source IP address.
Enable statistics per destination IP address Enable session statistics collection per destination IP address.
338BDisplaying session statistics by the IP address
1. Select Firewall > Session Table > Statistics from the navigation tree.
2. Click the IP Statistics tab.
3. Select the direction, specify the IP address, and select the VPN instance, VLAN ID, or INLINE ID.
4. Click Search.
The matching session statistics are displayed.