F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Configuration Guide-6PW100

5
Complete the following tasks to configure an Ethernet frame header ACL:
Task Remarks
1. Create an Ethernet frame header ACL.
Required.
For more information, see "
549H
Creating an ACL".
2. 550HConfiguring an Ethernet frame header ACL. Required.
108BRecommended IPv6 basic ACL configuration procedure
IPv6 basic ACLs match packets based only on source IP addresses.
Complete the following tasks to configure an IPv6 basic ACL:
Task Remarks
1. Create an IPv6 basic ACL.
Required.
For more information, see "
551H
Creating an IPv6 ACL".
2. 552HConfiguring an IPv6.
Required.
109BRecommended IPv6 advanced ACL configuration procedure
IPv6 advanced ACLs match packets based on the source IPv6 addresses, destination IPv6 addresses,
packet priorities, protocols carried over IPv6, and other protocol header fields such as the TCP/UDP
source port number, TCP/UDP destination port number, ICMPv6 message type, and ICMPv6 message
code.
Compared to IPv6 basic ACLs, IPv6 advanced ACLs allow more flexible and accurate filtering.
Complete the following tasks to configure an IPv6 advanced ACL:
Task Remarks
1. Create an IPv6 advanced ACL.
Required.
For more information, see "
553H
Creating an IPv6 ACL".
2. 554HConfiguring an IPv6 advanced ACL rule.
Required.
110BCreating an ACL
1. Select Firewall > ACL from the navigation tree.
All existing IPv4 basic ACL, IPv4 advanced ACLs, and Ethernet frame header ACLs will be
displayed in the right pane.