F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Configuration Guide-6PW100

138
356BConfiguration procedure
1. Configure zone 1 and zone 2, and specify security zones for the interfaces. (Details not shown)
2. Configure an ASPF policy.
a. Select Firewall > Session Table > Advanced from the navigation tree.
b. Click the ASPF tab.
c. Click Add.
d. Select zone 1 from the Source Zone list.
e. Select zone 2 from the Dest Zone list.
f. Click the Discard ICMP error packets box.
g. Click Apply.
Figure 117 Configuring an ASPF policy
53B
Configuring ASPF at the CLI
For more information about ASPF configuration, see Attack Protection Configuration Guide.