F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Configuration Guide-6PW100

184
• Configure the portal server parameters as needed. For more information about portal server
configuration, see the configuration manual provided with the portal server.
407BConfiguration procedure
1. Configure a RADIUS scheme:
# Create RADIUS scheme rs1 and enter its view.
<Firewall> system-view
[Firewall] radius scheme rs1
# Configure the server type for the RADIUS scheme. When using the IMC server, configure the
RADIUS server type as extended.
[Firewall-radius-rs1] server-type extended
# Specify the primary authentication server and primary accounting server, and configure the keys
for communication with the servers.
[Firewall-radius-rs1] primary authentication 192.168.0.112
[Firewall-radius-rs1] primary accounting 192.168.0.112
[Firewall-radius-rs1] key authentication simple radius
[Firewall-radius-rs1] key accounting simple radius
# Configure the access device to not carry the ISP domain name in the username sent to the
RADIUS server.
[Firewall-radius-rs1] user-name-format without-domain
[Firewall-radius-rs1] quit
2. Configure an authentication domain:
# Create ISP domain dm1 and enter its view.
[Firewall] domain dm1
# Configure AAA methods for the ISP domain.
[Firewall-isp-dm1] authentication portal radius-scheme rs1
[Firewall-isp-dm1] authorization portal radius-scheme rs1
[Firewall-isp-dm1] accounting portal radius-scheme rs1
[Firewall-isp-dm1] quit
# Configure domain dm1 as the default ISP domain for all users. Then, if a user enters a username
without any ISP domain at logon, the authentication and accounting methods of the default
domain are used for the user.
[Firewall] domain default enable dm1
3. Configure portal authentication:
# Configure a portal server on the firewall, specifying the portal server name as newpt, IP address
as 192.168.0.111, key as plaintext string portal, port number as 50100, and URL as
http://192.168.0.111:8080/portal.
[Firewall] portal server newpt ip 192.168.0.111 key simple portal port 50100 url
http://192.168.0.111:8080/portal
# Enable portal authentication on the interface connecting the host.
[Firewall] interface gigabitethernet 0/2
[Firewall–GigabitEthernet0/2] portal server newpt method direct
[Firewall–GigabitEthernet0/2] quit
4. Configure the portal server detection function:
# Configure the access device to detect portal server newpt, specifying the detection method as
portal heartbeat probe, setting the server probe interval to 40 seconds, and specifying the access