F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Configuration Guide-6PW100

12
Item Descri
p
tion
Destination MAC Address
Select the Destination MAC Address box, and specify the destination MAC
address and wildcard.
Destination Wildcard
LSAP Type
Select the LSAP Type box, and specify the DSAP and SSAP fields in the LLC
encapsulation by configuring the following two items:
• LSAP Type—Specifies the encapsulation format.
• LSAP Wildcard—Specifies the LSAP mask.
LSAP Wildcard
Protocol Type
Select the Protocol Type box, and specify the link layer protocol by configuring
the following two items:
• Protocol Type—Specifies a protocol type in Ethernet_II and Ethernet_SNAP
frames.
• Protocol Wildcard—Specifies a protocol type mask.
Protocol Wildcard
114BCreating an IPv6 ACL
1. Select Firewall > IPv6 ACL from the navigation tree.
The page displaying all IPv6 basic ACLs and IPv6 advanced ACLs appears.
Figure 9 IPv6 ACL
2. Click Add.
The page for creating an IPv6 ACL appears.
Figure 10 Creating an IPv6 ACL
3. Configure the IPv6 ACL, as described in 559HTable 6.
4. Click Apply.