F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Configuration Guide-6PW100

201
Figure 144 AAA configuration procedure
Table 51 AAA configuration task list
Task Remarks
Perform one of the following tasks to configure an AAA scheme:
• 707HConfiguring local users
• 708HConfiguring RADIUS schemes
• 709HConfiguring HWTACACS schemes
Required.
Complete at least one
task.
710H
Configuring AAA
methods for ISP domains
711H
Creating an ISP domain Required.
712H
Configuring ISP domain attributes Optional.
713H
Configuring authentication methods for an ISP domain
Required.
Complete at least one
task.
714H
Configuring authorization methods for an ISP domain
715H
Configuring accounting methods for an ISP domain
716H
Tearing down user connections Optional.
717H
Configuring a NAS ID-VLAN binding Optional.
NOTE:
To use AAA methods to control access of login users, you must configure the user interfaces to use AAA b
y
using the authentication-mode command. For more information, see Getting Started Guide.
229BConfiguring local users
To implement local AAA, you must create local users and configure user attributes on the device. The
local users and attributes are stored in the local user database on the device. A local user is uniquely
identified by a username. Configurable local user attributes are as follows:
• Service type.