F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Configuration Guide-6PW100

240
Error: Invalid configuration or no response from the authentication server.
Info: Change authentication mode to local.
Password: Å Enter the password for local privilege level switching authentication.
User privilege level is 3, and only those commands can be used
whose level is equal or less than this.
Privilege note: 0-VISIT, 1-MONITOR, 2-SYSTEM, 3-MANAGE
239BAAA for portal users by a RADIUS server
The following matrix shows the configuration example and hardware compatibility:
Hardware Exam
p
le a
pp
licable
F1000-A-EI/F1000-S-EI Yes
F1000-E Yes
F5000 No
Firewall module Yes
U200-A Yes
U200-S Yes
471BNetwork requirements
As shown in 760HFigure 150, the host automatically obtains a public network IP address through DHCP.
Configure the firewall to:
• Use the RADIUS server for authentication, authorization, and accounting of portal users.
• Provide direct portal authentication so that the host can access only the portal server before passing
portal authentication and can access the Internet after passing portal authentication.
• Include the domain name in a username sent to the RADIUS server.
On the RADIUS server, add a service that charges 120 dollars for up to 120 hours per month, and
configure a user and register the service for the user.
Set the shared keys for secure RADIUS communication to expert. Set the ports for
authentication/authorization and accounting to 1812 and 1813, respectively.
Figure 150 Network diagram