F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Configuration Guide-6PW100

250
242BConfiguring HWTACACS schemes
478BRecommended configuration procedure
Ste
p
Remarks
1. 773HCreating the HWTACACS
scheme
Required.
Create the HWTACACS scheme system.
By default, no HWTACACS scheme exists.
2. Configuring HWTACACS
authentication servers
Required.
Specify the primary and the secondary HWTACACS authentication servers
for the HWTACACS scheme system. When the primary server is not
available, the secondary server is used. If no redundancy is needed, specify
only the primary server. For more information about the configuration
procedure, see "
774H
Configuring HWTACACS servers."
By default, no HWTACACS authentication server is specified.
3. Configuring HWTACACS
authorization servers
Required.
Specify the primary and the secondary HWTACACS authorization servers
for the HWTACACS scheme system. When the primary server is not
available, the secondary server is used. If no redundancy is needed, specify
only the primary server. For more information about the configuration
procedure, see "
775H
Configuring HWTACACS servers."
By default, no HWTACACS authorization server is specified.
4. Configuring HWTACACS
accounting servers
Optional.
Specify the primary and the secondary HWTACACS accounting servers for
the HWTACACS scheme system. When the primary server is not available,
the secondary server is used. If no redundancy is needed, specify only the
primary server. For more information about the configuration procedure, see
"
776H
Configuring HWTACACS servers."
By default, no HWTACACS accounting server is specified.
5. 777HConfiguring HWTACACS
parameters
Optional.
Configure the parameters that are necessary for information exchange
between the device and HWTACACS server.
479BCreating the HWTACACS scheme named system
To create HWTACACS scheme system:
1. Select User > HWTACACS > Server Configuration or User > HWTACACS > Parameter
Configuration from the navigation tree.
2. The page shown in 778HFigure 155 appears, asking you to create the HWTACACS scheme.
3. Click Add.
Figure 155 Creating the HWTACACS scheme system