F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Configuration Guide-6PW100

19
Figure 21 Associating HTTP service with ACL 2000
21B
Configuring the ACL at the CLI
118BConfiguration task list
Task Remarks
563H
Configuring a basic ACL Required.
Configure at least one task.
Configuring a basic ACL is applicable to IPv4 and IPv6.
Configuring an Ethernet frame header ACL is applicable to
IPv4.
564H
Configuring an advanced ACL
565H
Configuring an Ethernet frame header ACL
566H
Copying an ACL
Optional.
Applicable to IPv4 and IPv6.
567H
Enabling ACL acceleration for an IPv4 basic or
IPv4 advanced ACL
Optional.
Applicable to IPv4.
119BConfiguring a basic ACL
265BConfiguring an IPv4 basic ACL
IPv4 basic ACLs match packets based only on source IP addresses.
To configure an IPv4 basic ACL:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A