F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Configuration Guide-6PW100

270
Figure 177 Network diagram
491BConfiguring the HWTACACS server
Set the shared keys to expert, add a Telnet user account, and set the password for the user. (Details not
shown.)
492BConfiguring the firewall
1. Configure the IP address of each interface and add them to security zones. (Details not shown.)
2. Create the HWTACACS scheme system:
a. From the navigation tree, select User > HWTACACS > Server Configuration.
b. On the page as shown in 790HFigure 178, click Add.
Figure 178 Creating the HWTACACS scheme named system
After the HWTACACS scheme is created, the HWTACACS server configuration page appears, as shown
in
791HFigure 179.
3. Configure the HWTACACS authentication server:
a. Select Authentication Server as the server type.
b. Enter 10.1.1.1 as the IP address of the primary server.
c. Enter 49 as the TCP port of the primary server.
d. Select Shared Key, enter expert as the shared key, and then confirm it.
e. Click Apply.
Internet
Firewall
Telnet user
HWTACACS server
10.1.1.1/24