F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Configuration Guide-6PW100

271
Figure 179 Configuring an HWTACACS authentication server
4. Configure an HWTACACS authorization server:
a. On the page as shown in 792HFigure 179, select Authorization Server as the server type.
b. Enter 10.1.1.1 as the IP address of the primary server.
c. Enter 49 as the TCP port of the primary server.
d. Select Shared Key, enter expert as the shared key, and then confirm it.
e. Click Apply.
5. Configure an HWTACACS accounting server:
a. On the page as shown in 793HFigure 179, select Accounting Server as the server type.
b. Enter 10.1.1.1 as the IP address of the primary server.
c. Enter 49 as the TCP port of the primary server.
d. Select Shared Key, enter expert as the shared key, and then confirm it.
e. Click Apply.
6. Configure the parameters for communication between the firewall and the HWTACACS server:
a. Select User > HWTACACS > Parameter Configuration from the navigation tree.
b. Select without-domain for the username format.
c. Click Apply.
Figure 180 Configuring the communication parameters