F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Configuration Guide-6PW100
280
84B
Setting user group password control parameters
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Create a user group and
enter user group view.
user-group group-name N/A
3. Configure the password
aging time for the user
group.
password-control aging
aging-time
Optional.
By default, the password aging time of the user
group equals the global password aging time.
4. Configure the minimum
password length for the
user group.
password-control length
length
Optional.
By default, the minimum password length of the
user group equals the global minimum password
length.
The password must contain at least 8 characters.
5. Configure the password
composition policy for
the user group.
password-control
composition type-number
type-number [ type-length
type-length ]
Optional.
By default, the password composition policy of
the user group equals the global password
composition policy.
Composition type-number must be 4 in FIPS
mode.
85B
Setting local user password control parameters
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Create a local user and
enter local user view.
local-user user-name N/A
3. Configure the password
aging time for the local
user.
password-control aging
aging-time
Optional.
By default, the local user takes the setting of the
user group to which it belongs. If no aging time is
configured for the user group, the local user will
take the global setting.
4. Configure the minimum
password length for the
local user.
password-control length
length
Optional.
By default, the local user takes the setting of the
user group to which it belongs. If no minimum
password length is configured for the user group,
the local user will take the global setting.
The password must contain at least 8 characters.
5. Configure the password
composition policy for
the local user.
password-control
composition
type-number
type-number
[ type-length
type-length ]
Optional.
By default, the local user takes the settings of the
user group to which it belongs. If no password
composition policy is configured for the user
group, the local user will take the global settings.
Composition type-number must be 4 in FIPS mode.