F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Configuration Guide-6PW100

46
b. Select the Source IP Address box.
c. Enter 192.168.1.2 in the Source IP Address field.
d. Enter 0.0.0.0 in the Source Wildcard field.
4. Click Apply.
Figure 36 Configuring a rule to allow Host A to access Firewall all the time
285BCreating a rule to disable other hosts from accessing Firewall on Saturday and Sunday
1. Click Add on the page which displays the rules of ACL 2000.
2. Create an ACL rule as shown in 586HFigure 37.
a. Select Deny as the operation.
b. Select time as the time range.
c. Select Source IP Address box.
d. Enter 192.168.1.0 in the Source IP Address field.
e. Enter 0.0.0.255 in the Source Wildcard field.
3. Click Apply.
Figure 37 Configuring an ACL rule to disable other hosts from accessing Firewall on Saturday and
Sunday
286BConfiguring an ACL rule to allow other hosts to access Firewall
1. Click Add on the page which displays the rules of ACL 2000.
2. Select Permit as the operation.
3. Click Apply.