F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Configuration Guide-6PW100

53
Figure 48 Host address resource configuration page
3. Configure the host address resource as described in 592HTable 13.
4. Click Apply.
Table 13 Configuration items
Item Descri
p
tion
IP Address
Select either of them as the address resource type.
Host name
Name
Specify the name for the host address resource.
IMPORTANT:
All resources (excluding the time range resources) must have unique names.
Description Describe the host address resource in brief.
IP Address
Specify the IP addresses for the host address resource:
• Enter an IP address in the IP Address field, and then click Add to add it to the IP
list.
• Select one or more IP addresses in the IP list, and then click Remove to remove
them from the IP list.
This item is available after you select IP Address as the address resource type.
Host name
Specify the host name for the host address resource.
This item is available after you select Host name as the address resource type.
297BConfiguring an address range resource
1. Select Resource > Address > IP Address from the navigation tree.