F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Configuration Guide-6PW100

82
311B Changing the priority of a rule
1. Select Firewall > Security Policy > Interzone Policy from the navigation tree to enter the interzone
policy rule list page.
2. Click the icon for a rule to bring up the dialog box as shown in 617H Figure 72.
Figure 72 Modifying the priority of a rule
3. Enter the ID of the target rule in the field and click Apply to place the rule before the target rule.
{ If you enter 65535, the rule is placed at the end of all the rules.
{ If the target ID you enter does not exist, the rule is not moved.
312B Querying policies by IP address
1. Select Firewall > Security Policy > Policy Inverse Query from the navigation tree.
Figure 73 Querying policies by IP address
TIP:
Clicking the Configure Interzone Policy link goes to the interzone policy rule list page. You can also selec
t
Firewall > Security Policy > Interzone Policy from the navigation tree to enter the page.
2. Enter the IP address in the field, and choose whether you want to query by source or destination
IP address from the list.
3. Click Search.
The page displays the policies with the source or destination IP address.
159B Configuring an interzone policy group
313B Configuring an IPv4 interzone policy group
1. Configuration prerequisites
Before configuring an interzone policy group, complete the following tasks: