F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Access Control Configuration Guide-6PW100

88
4. Only the files suffixed with .xml can be imported.
5. Click Apply to import all configurations in the file.
161BDisplaying packet statistics of an interzone policy
1. Select Firewall > Security Policy > Policy Matching Statistics from the navigation tree.
2. Select the source and target zone, and then click Search.
The page displays the results matching the search conditions.
622HTable 29 describes the fields on the
page.
Figure 80 Statistics of an interzone policy
To clear the packets statistics of the related interzone policy, click Reset in the Operation column. At this
time the system starts to perform statistics again.
Table 29 Field description
Item Descri
p
tion
Permitted Packets
Number of packets that match the interzone policy and are forwarded
during the statistics time.
Denied Packets
Number of packets that match the interzone policy and are dropped
during the statistics time.
Start Time Start time of the statistics.
End Time End time of the statistics.
162BInterzone policy configuration example
317BNetwork requirements
As shown in 623HFigure 81, Firewall connects the corporate network to the Internet. The corporate network
belongs to zone Trust, and the external network belongs to zone Untrust.
Configure an interzone policy, allowing internal host Public to access the external network at any time
and denying all the other internal hosts’ access to the external network during working hours (from 8:00
to 18:00) on working days (from Monday through Friday).