F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Attack Protection Command Reference-6PW100

62
Views
System view
Default command level
2: System level
Parameters
deny: Specifies the filtering action as denying packets to pass the firewall.
permit: Specifies the filtering action as permitting packets to pass the firewall.
Examples
# Specify the default filtering action of the IPv6 firewall as denying packets to pass.
<Sysname> system-view
[Sysname] firewall ipv6 default deny
firewall ipv6 enable
Use firewall ipv6 enable to enable the IPv6 firewall function.
Use undo firewall ipv6 enable to disable the IPv6 firewall function.
Syntax
firewall ipv6 enable
undo firewall ipv6 enable
Default
The IPv6 firewall function is disabled.
Views
System view
Default command level
2: System level
Examples
# Enable the IPv6 firewall function.
<Sysname> system-view
[Sysname] firewall ipv6 enable
firewall packet-filter ipv6
Use firewall packet-filter ipv6 to configure IPv6 packet filtering on the interface.
Use undo firewall packet-filter ipv6 to remove the IPv6 packet filtering setting on the interface.
Syntax
firewall packet-filter ipv6 { acl6-number | name acl6-name } { inbound | outbound }
undo firewall packet-filter ipv6 [ { acl6-number | name acl6-name } ] { inbound | outbound }
Default
IPv6 packets are not filtered on the interface.