F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Attack Protection Command Reference-6PW100

66
Syntax
port-mapping application-name port port-number [ acl acl-number ]
undo port-mapping [ application-name port port-number [ acl acl-number ] ]
Default
There is no mapping between the port and the application layer.
Views
System view
Default command level
2: System level
Parameters
application-name: Name of the application for port mapping. Available applications include FTP, GTP-C,
GTP-U, GTP-V0, H323, HTTP, RTSP, SCCP, SIP, SMTP and SQLNET.
port port-number: Specifies the port that the application layer protocol is mapped to. The port number is
in the range of 0 to 65535.
acl acl-number: Specifies the IPv4 ACL for indicating the host range. The ACL number is in the range of
2000 to 2999.
Examples
# Map port 3456 to the FTP protocol.
<Sysname> system-view
[Sysname] port-mapping ftp port 3456
Related commands
display port-mapping