F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Attack Protection Configuration Guide-6PW100

102
d. Select HTTP filtering policy http_policy2, SMTP filtering policy smtp_policy, FTP filtering policy
ftp_policy, and Telnet filtering policy telnet_policy.
e. Click Apply.
Figure 92 Configuring a content filtering policy template with java applet blocking
13. Configure an interzone policy for traffic from security zone Trust to destination 5.5.5.5 in security
zone Untrust, referencing the content filtering policy template without java applet blocking:
a. From the navigation tree, select Firewall > Security Policy > Interzone Policy.
b. Click Add.
c. Select Trust as the source zone and Untrust as the destination zone.
d. Select any_address as the source IP address. In the Destination IP Address area, select the New
IP Address option and then enter destination IP address 5.5.5.5/0.0.0.0.
e. Select any_service as the service name and Permit as the filter action.
f. Select content filtering policy template template1.
g. Select the Enable the rule box to enable the rule.
h. Select the Continue to add next rule box to add another rule after finishing this one.
i. Click Apply.