F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Attack Protection Configuration Guide-6PW100

111
NOTE:
• SMTP filtering policies created in system view belong to the default VD.
• SMTP filtering policies created in VD view belong to the corresponding VD.
213BConfiguring a POP3 filtering policy
You can specify multiple filtering entries for filtering POP3 packets in a POP3 filtering policy. Packets that
match any filtering entry are dropped.
A POP3 filtering policy can contain different types of filtering entries and each type can contain multiple
filtering entries.
To configure a POP3 filtering policy:
Ste
p
Command Remarks
1. Enter system view. system-view N/A
2. Enter VD view.
switchto vd vd-name
This command is required for entering the
system view of a non-default VD.
3. Create a POP3
filtering policy and
enter its view.
content-filtering pop3-policy
policy-name
By default, no POP3 filtering policy exist.
4. Specify an email
address filtering entry
for sender filtering.
sender-filtering email-entry
email-entry-name
Optional.
By default, no email address filtering entry
is specified for sender filtering.
5. Specify an email
address filtering entry
for receiver filtering.
receiver-filtering email-entry
email-entry-name
Optional.
By default, no email address filtering entry
is specified for receiver filtering.
6. Specify a keyword
filtering entry for
subject filtering.
subject-filtering keyword-entry
keyword-entry-name
Optional.
By default, no keyword filtering entry exists
is specified for subject filtering.
7. Specify a keyword
filtering entry for
body filtering.
body-filtering keyword-entry
keyword-entry-name
Optional.
By default, no keyword filtering entry is
specified for body filtering.
8. Specify a filename
filtering entry for
attachment name
filtering.
attachment-name-filtering
filename-entry filename-entry-name
Optional.
By default, no filename filtering entry is
specified for attachment name filtering.
9. Specify a keyword
filtering entry for
attachment content
filtering.
attachment-body-filtering
keyword-entry
keyword-entry-name
Optional.
By default, no keyword filtering entry is
specified for attachment content filtering.
10. Enable POP3 filtering
logging.
logging enable
Optional.
By default, POP3 filtering logging is
disabled.
POP3 filtering logging takes effect only
when interzone policy rule logging is
enabled.