F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Attack Protection Configuration Guide-6PW100

7
11B
Configuring attack detection and protection in the
Web interface
54BConfiguring packet inspection
1. From the navigation tree, select Intrusion Detection > Packet Inspection.
Figure 5 Packet inspection configuration page
2. Configure packet inspection, as described in 268HTable 2.
3. Click Apply.
Table 2 Configuration items
Item Descri
p
tion
Zone Select a zone to detect attacks from the zone.
Discard Packets when the specified attack is detected Select this option to discard detected attack packets.
Enable Fraggle Attack Detection Enable or disable detection of Fraggle attacks.
Enable Land Attack Detection Enable or disable detection of Land attacks.
Enable WinNuke Attack Detection Enable or disable detection of WinNuke attacks.
Enable TCP Flag Attack Detection Enable or disable detection of TCP flag attacks.
Enable ICMP Unreachable Packet Attack Detection
Enable or disable detection of ICMP unreachable
attacks.
Enable ICMP Redirect Packet Attack Detection Enable or disable detection of ICMP redirect attacks.
Enable Tracert Packet Attack Detection Enable or disable detection of Tracert attacks.
Enable Smurf Attack Detection Enable or disable detection of Smurf attacks.