F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Attack Protection Configuration Guide-6PW100

123
Figure 103 Configuring ACL 2010
3. Enable strict URPF check in Zone B:
a. From the navigation tree, select Intrusion Detection > URPF Check.
The URPF configuration page appears, as shown in
427HFigure 104.
b. Select zoneB in Security Zone.
c. Select Enable URPF.
d. Select ACL and type 2010 in the field.
e. Select Strict in Type of Check.
f. Click Apply.
Figure 104 Configuring URPF in zoneB
222BConfiguring Device A
1. Configure the interface IP addresses and security zones they belong to. (Details not shown.)
2. Enable strict URPF check in Zone A:
a. From the navigation tree, select Intrusion Detection > URPF Check.
The URPF configuration page appears, as shown in
428HFigure 105.
b. Select zoneA in Security Zone.
c. Select Enable URPF.