F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Attack Protection Configuration Guide-6PW100

30
Figure 35 Network diagram
151BConfiguring the firewall
1. Assign IP addresses and security zones to the interfaces. (Details not shown.)
2. Enable the blacklist feature:
a. From the navigation tree, select Intrusion Detection > Blacklist.
b. The blacklist management page appears, as shown in 303HFigure 36.
c. In the Global Configuration area, select Enable Blacklist, and click Apply.
d. Click Apply.
Figure 36 Enabling the blacklist feature
3. Add a blacklist entry for Host D:
a. In the Blacklist Configuration area, click Add.
b. On the page that appears (see 304HFigure 37), enter the IP address 5.5.5.5, select Permanence.
c. Click Apply.
Host A Host B
Internet
Host C
192.168.1.5/16
GE0/2
192.168.1.1/16
GE0/1
202.1.0.1/16
FirewallTrust
Untrust
Host D
5.5.5.5/24