F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Attack Protection Configuration Guide-6PW100

90
Item Descri
p
tion
Sender Filtering
Select the filtering entries to be used for
sender filtering.
IMPORTANT:
• Packets that match
these filtering
conditions will be
dropped.
• You must configure at
least one of these
items.
Receiver Filtering
Select the filtering entries to be used for
receiver filtering.
Subject Filtering
Select the filtering entries to be used for
subject filtering.
Body Filtering
Select the filtering entries to be used for
body filtering.
Attachment
Filtering
Attachment
Name Filtering
Select the filtering entries to be used for
attachment name filtering.
Attachment
Content Filtering
Select the filtering entries to be used for
attachment content filtering.
Enable Logging
Specify whether to log packet matching events.
IMPORTANT:
The logging function takes effect only when it is enabled in both the
content filtering policy and the interzone policy.
199BConfiguring an FTP filtering policy
1. From the navigation tree, select Identification > Content Filtering > Filtering Policy.
2. Select the FTP Policy tab to enter the FTP filtering policy list page, as shown in 390HFigure 74.
Figure 74 FTP filtering policy list
3. Click Add to enter the page for adding an FTP filtering policy, as shown in 391HFigure 75.