F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Attack Protection Configuration Guide-6PW100

91
Figure 75 Adding an FTP filtering policy
4. Configure the FTP filtering policy, as described in 392HTable 21.
5. Click Apply.
Table 21 Configuration items
Item Descri
p
tion
Name Specify the name for the FTP filtering policy.
Command Filtering
Select the filtering entries to be used for
command word filtering.
IMPORTANT:
• Packets that match
these filtering
conditions will be
dropped.
• You must configure at
least one of these
items.
Upload Filename Filtering
Select the filtering entries to be used for
upload filename filtering.
Download Filename Filtering
Select the filtering entries to be used for
download filename filtering.
Enable Logging
Specify whether to log packet matching events.
IMPORTANT:
The logging function takes effect only when it is enabled in both the content
filtering policy and the interzone policy.
200BConfiguring a Telnet filtering policy
1. From the navigation tree, select Identification > Content Filtering > Filtering Policy.
2. Select the Telnet Policy tab to enter the Telnet filtering policy list page, as shown in 393HFigure 76.
Figure 76 Telnet filtering policy list